Security Surveillance Equipment

Security System and Surveillance  Equipment 

IMSI Catcher mini.
IMSI / IMEI Extraction and Tracking

Portable IMSI Catcher mini Surveillance  Equipment introduces a new age for tactical systems in the services of Law Enforcement and Intelligence Agencies. This highly compact unit fits neatly into Which jacket pocket and provides all the benefits of the Intercept line of tactical systems and at the same time allows conducting close-up operations covertly while being located in the immediate vicinity of targets. Portable IMSI Catcher mini supports a multitude of programs such as Portable Cellular Locator for tactical location tracking and Portable IMSI Catcher for tactical identity extraction. Portable IMSI Catcher mini supports two GSM bands (900/1800 or 850/1900) or two UMTS bands (2100, 1900, 1700, 900, 850) and Inherently runs on battery that lasts for hours.


Summary:
Location Tracking for 2G
Ring - Call to Target
An Essential Tool for Support of cover Operational Needs
Touch Screen Interface
Compact and lightweight Fitting

Features:
IMSI, IMEI Extraction
Portable mini IMSI Catcher allows its user to extract the IMSI and IMEI of the MS operating in its coverage area (as well as some additional data). This Enables users that are equipped with a database of IMEI and IMSI's's to identify the potential targets active in the area.
Support of Operational Needs
Extracting the IMSI and IMEI of the MS in the area supports various operational needs. Comparing these identities to a known database helps to identify targets and can be used, by adding other optional abilities of Portable Intercept, monitor and intercept the target traffic, perform location tracking and active positioning, etc. Portable mini IMSI Catcher is a valuable tool in different scenarios, dry as border control and surveillance operations. It is also serves as an essential means of gathering metadata and acquiring new targets in certain location.

The system is an innovation in the field of tactical systems for the Police and Intelligence.

The compact unit fits perfectly in a jacket and Ensures all the benefits of an advanced tactical system and at the same time allows you to run targeted operations and covered when you are in the vicinity of the objectives.
The system supports a multitude of programs such as location and IMSI Catcher tactics for data extraction.
The IMSI Catcher supports dual-band or dual-band GSM and UMTS is powered by batteries lasting an hour.
The system extracts the IMSI and IMEI of GSM or UMTS terminals operating in its area of ​​coverage (as well as some other data). This allows users who have a database of IMEI and IMSI to identify potential targets active in their area.
Pull out the IMSI and IMEI of the terminals GSM / UMTS in the operational area is useful for a variety of needs. The comparison of these identities with a database helps identify the objectives by adding more features, and in the monitoring of traffic in the interception target, to locate the terminals.
The IMSI Catcher is a valuable tool in many scenarios, drought and border controls and surveillance (close observation, especially of a suspected spy or criminal) operations. It also serves as an essential means for the acquisition of metadata and to identify new targets in specific areas.


Car Security System ACS Remote Control Car Code Scanner.

It was called Japanese cars killer, it can unlock almost all Japanese brand cars' doors.
It also can unlock Some US and European brand cars's doors, Such as Buick, Volkswagen, Fiat, etc.

Surveillance  equipment used to Detect, receive, copy all kinds of car remote control signals, then command the car as freely as the car's owner.

Auto Remote Control Blocker (PND-ARCB003) New 2013 version is the most advanced till now. It suits for Honda, Hyundai, Bluebird, BYD, Mazda, KIA, Toyota, Nissan, Ford, Buick and other kinds of cars. It would open the car freely after detecting and scanning the remote control signal sended by the original key. Simple and fast to operate.

Features:

1. Receiving 301MHZ, 315MHZ, 201MHz, 330MHz, 400MHz, 430MHz, 433MHZ, 868MHZ, 918MHZ frequency Nine fixed code at the same time.
2. Suit for HCS301, HCS300, rolling code, smart anti-theft frequency, inductive anti-theft frequency.
3. Distinguish lots kinds of chips, show the code information.
4. High stability, high sensibility. The effect distance is as long as 60 meters.
5. Size: 82 mm * 54 mm * 22MM
6. Operating voltage: 6.5V
7. Operating Current: ≤40MA
8. Operating temperature: -10 ℃ ~ 60 ℃
9. Battery: 1650mA lithium battery
10. Standby Time: not less than 40 hours

Operating Distance: 30 meters - 120 meters.

Fool type operation, it's very easy to use.
There was talk of Japanese cars killer, it can unlock the door almost all the Japanese brands Cars.

It can also unlock the door Some American and European vehicle brands such as Buick, Volkswagen, Fiat, etc.

Its is used to detect, receive, copy all kinds of car remote control signals, then command the car as freely owner of the vehicle. Auto Remote Control Blocker (PND-ARCB003) 2013 The new version is the most advanced today. It is suitable for Honda, Hyundai, Bluebird, BYD, Mazda, Kia, Toyota, Nissan, Ford, Buick and other types of vehicles. That would open the car freely after detection and scanning remote control signal sent by the original key. Simple and fast operation.

features:

1. Receipt 301MHZ, 315MHz, 201MHz, 330MHz, 400MHz, 430MHz, 433MHz, 868MHz, 918MHZ frequency Nine fixed code at the same time.
2. Suit for HCS301, HCS300, rolling code frequency smart anti-theft, anti-theft induction frequency.
3. Distinguish many kinds of chips, display information about the code.
4. High stability, high sensitivity. The effect of distance is as long as 60 meters.
5. Size: 82 mm * 54 mm * 22 mm
6. Operating voltage: 6.5V
7. Operating current: ≤40MA
9. Battery: 1650 mm lithium battery
10. Standby time: not less than 40 hours

Operating distance: 30 m - 120 m.
Idiot type of operation, it is very easy to use .



SN8 car remote control blocker Car Security System

SN 8 decoder The basic functions of SN 8 car remote control blocker are scan,
copy, block and save the remote control signal etc.
Complete touch screen design, built-in antenna, and effective work
cover range up to around 50 m, standby time up to 10 days. Apply intelligent scanning technology; all the operations need only a
touch. No save limitation, you may save as many codes as you
Can. Update on line.

Automatically surveillance  equipment identify chips, display the code information.

The basic functions of SN 8 remote control car windows are scanning,
copy, block and store the remote control signal, etc.
Complete design touch screen, built-in antenna, and effective work
coverage range up to about 50 meters, standby time up to 10 days. Use intelligent scanning technology; all operations just
touch. Not impose restrictions, you can save as many codes as you
can. Update on line.
Automatic identification chips, display information about the code.
Available frequency: 315MHz, 433MHz, 868MHz
Suitable for automotive, motorcycle, electric cars, electric gates,
retractable doors, garage doors, and so on.

Performing checks against eavesdropping, inspections of premises against eavesdropping and RF Radiomonitoring Security Surveillance Equipment

Performing checks against eavesdropping, inspections of premises against eavesdropping and Radiomonitoring RF signals
DETECTION wiretaps, inspections AGAINST Speakerphone - screening of all spaces, apartments, offices and vehicles against eavesdropping.

The review against eavesdropping includes a physical inspection of the audited area, or somewhere is not hidden special miniature establishment used to transfer audio or video of the reviewed sites is further carried out the necessary measurement of special devices that capture signals that transmit bugs, video bugs, GSM pagers, or other special equipment, which transmits information by radio.

It is also inspected for network distribution and metallic lines. Inspections have varying degrees by acts performed and it also responds to the price of basic acceptance, to measure nonlinear transitions. Just for its nice to know that according to statistical surveys is approximately every 500 m2 area cleared odposluchový found a remedy ...
Discovering hidden MINIKAMIER - screening of all spaces, apartments, offices and a variety of subjects to detect hidden minicam installed, for example. and with pinhole lens the size below 1 mm that surreptitiously monitors the area where it is located. Minikamerky are often camouflaged for example. the walls, concealed in zariadzovacích subjects in toys, light installations, paintings, the flower decorations, the furniture, electronic devices and so on. Control is carried special equipment. The monitoring you do and you know yourself detector hidden cameras, Of course even the cheapest cameras are reliable detector detects micro camera in an area up to 30m / second
The technique of wiretaps - the technique carries seeking to reveal the newly brought bedbugs (radio microphone, video bugs, On the transmission AV devices or active mobile phone to call) to the monitored area (Offices, apartments, vehicles) or prevents listening space. that an attacker eavesdrop special equipment from the outside through the walls. This is a personal detectors for rapid inspection of premises or persons, or on instruments contained static for long-term control and protection of space. The detector signal FR is advisable to have preventive installed in the home or office to avoid unwanted FR radio being introduced bugs. It depends on how much you invest in protecting their privacy.
Spectrum analysis
Active analog and digital radio listening devices.
Active listening devices scrambled or otherwise disguised.
Illegal approaches and attempts to break into networks of LAN through 802.11xx, 802.15xx and other standards.
This type of screening is an effective alternative to unreliable detectors and memory controlled spectrum analyzer users - laymen. RF spectrum analysis provide superior protection technique of manipulating skilled in the art. Service can be detected:

Complete clearance space
This clearance is suitable for clients who are likely to use sophisticated means of tapping, eavesdropping or other methods such as radio in different spectrum.
Entire background check can reveal:
Suburban listening devices (wired), realized with wires or metal structures.
Listening devices using infrared light spectrum and other forms of transmission.
Longwave listening devices using the transmission via power distribution systems.
Radio listening devices with analog open communication.
Radio scrambled or otherwise disguised listening devices.
Radio, digital listening devices on a discrete frequency.
Digital listening devices remotely operated, using public networks (GSM, 3G / UMTS, CDMA ...).
Listening devices implemented modified GSM phone (pohodený "forgotten" phone).
Illegal access to networks such as LANs via 802.11xx, 802.15xx and other standards.
Other types of listening devices, designed specifically for deployment.
Inactive - used a listening device (discharged).

To reveal eavesdropping (bugs) and securing the area against the disclosure of information we can offer our services and our contract service companies that have similar services from conventional security agencies and similar companies differ mainly in the following points:
High technical expertise - working on the development of RF and SPECT. electronics for over 20 years. We have developed a range of unique facilities used among other things to protect and ensure discreet environment of high government officials.
We use cutting-edge metering and sub-analytical equipment. OTP for power are used the same technology, processes and the software that is used in similar ingredients such as. military defense intelligence office for the protection of constitutional officials.
Maximum efficiency is ensured by sophisticated methodology of triangulation Radio Frequency (RF) spectrum. This method involves detailed comparison (correlation) RF spectrum of a given area with RF reference spectra of this site.
Personnel conducting OTP is verified by the NBU classification level SECRET or TOP SECRET. The review of the natural person is a certain guarantee of integrity, personality and safety reliability.
Part of the evaluation is the actual measurement protocol applicable for off-line analysis.
Availability of services is "non-stop" and outside the EU. For more accurate information you can ideally be agreed by phone or by e-mail a personal meeting.
Our company can offer you for your protection to the various technological protection devices and also on the detection technology for listening we can advise the appropriate technology to safeguard evidence other illegal activities directed against you.

RADIO steteskop - for surround listening where it is not possible to place a radio microphone there may be used a set of contact radio microphone (stethoscope) which is mounted on the object from the outside and very sensitive senses the vibrations of the window panes, doors or walls that are shakily spoken word and other sounds. This electronic stethoscope has been very successfully used for the listening room and a 30 cm thick wall ...
TECHNOLOGY recording Fixed telephony - can easily connect with voice recorder to record phone calls so ,. Easy and quick installation on standard telephone lines. Collaborated. with a recorder, only record calls and sounds all pick up the handset.

Wired microphones - for surround listening, suitable as a supplement for a variety of digital and analog recording equipment sound-recording of the space, or in addition to placement on the body, in clothing, in suitcases, for self-monitoring conversation, meetings and so on.

AREA speakerphone using a special MOBOLNÉHO telephone - listening chosen space for any distance (even thousands of kilometers) using a specially modified GSM phone (mobile phone, which looks like a standard device) on which the entitlement room - Client calls from anywhere in the surround listening ,, "and phone minute usage is only relevant operator.
Suitable for remote control of your own space, for example. apartment, car, office, etc. On the phone with this special treatment will have no effect, it just made it through listening space. Phone is off, vibrate, beep does not sound as monitor concealed spaces around them. The most expensive version it can be used, nor should the user knew that from among themselves in the form your phone wears surround speakerphone and use your phone as himself less suspicion.

Decryption of passwords - in electronic documents, for example. you lose the password to the text in electronic form on a PC, different files and so on.
In fact, everything you desire ... at different prices and designs.
We can ensure you of course also the most expensive technologies that are at various exhibitions praising companies who intend to develop technology in this area. Of course, like ourselves are manufacturers of RF detectors and radio equipment for the interception interest priekoroch.


Micro Video Recorder to allow for continuous recording of video and audio in your office.


Video Recorder mAVR H.264x4-TFT-419 is designed for professional recording video and audio data either from an external source or from the built-in video camera and microphone on an SD or SDHC flash memory cards to further play. Recorder offers the possibility to load up to 4 memory cards for both parallel and alternative recording. Video cameras in addition to the camouflage hidden micro cameras.
The main competitive advantages are:
The recorder can operate with four cards up to 32-GB each, for a total of 128 gigabytes record!
Parallel recording of image data equal to 2 memory cards. (Unsurpassed forensic evidence)
The possibility of a circular recording on a memory card (one or more).
The recorder allows you to insert an image into any text (Automotive brand, your initials, place) and increase the value of records as evidence.
Independent adjustment of the transmission rate of the audio and video streams.
specifications:
MAVR-H264x4-419 TFT Video Recorder has the following specifications:
Capture video from an external source or from the built-in video camera (H.264) AVC to provide resolution to 640x480 or 720x576 video camera for external power supply
Video signal scaling (image compression) and appears 96x96
Adjustable video signal filtering
Independent setting of bitrate for audio and video streaming
Adjustable frames per second for video stream
Auto sensitivity built-in video camera (can be deactivated)
Automatic white balance correction for the built-in video camera
silencing suppression to eliminate the impact of the daily electric lamps.
The layout of the text on the video signal (date, time, GPS data-optional accessory, text line) - up to 2 lines with 24 characters each, depending on the selected resolution
When recording video signal - to automatically or manually select a video standard used
Adjustable parameters for video signals (brightness, contrast, saturation, color)
Record audio from an external audio source (MF input) or from the built-in microphone in AAC format (mono or stereo)
Manual or automatic gain adjustment of audio channels
Data recording is done directly to MP4 format without further conversion
Parallel recording of video data to two cards
The ability to view video recordings directly from the recorder
Built-in clock and calendar
Start recording by:
- "Rec" Switch on sensor screen,
- Timer
- Input Signal,
- Built-in motion detector
- VAS (Voice Activation System)
- The signal from analog to digital adapter
- recording
Circular recording to a memory card (1 or more memory cards)
Power supply from external power supply or the built-in Li-ion rechargeable battery. When powered from an external source rechargeable battery is charging
Power supply external power consumer (eg. Video camera) with output voltage options (5 or 12 V)
Ability to work with a GPS receiver - Optional
Setting using the menu or by using the "Manager" program
The possibility to choose the interface language (Russian, English)
The opportunity to upgrade internal software
Height 69 mm
Width 82 mm
Thickness 18.5 mm
Weight 145 g
Recording time 1h to 2 GB
Battery life in record mode up to 8 hours
Power Rechargeable Battery
Battery life on standby up to 12 months
Compact Flash card up to 32 GB
Frequency range from 80 to 20,000 Hz
Dynamic Range - 92 db
Voice Activating System YES
Motion Detector YES
Timer recording YES
For a given product supply other accessories included in the product itself:
External microphones for mAVR H.264S
Analog-to-Digital Adapter for mAVRH.264S
12V car adapter
Video input cable with remote control for mAVR H.264 / TFT
Before starting the recorder must be fully charged. It takes about 3 hours charging.
Charging rate can be seen on the screen when you turn on the recorder On-Off Switch
(1). 5 To start recording, make sure the main card (memory card with recorded information service) in the hole
(2). Recorder reads the service information necessary for the operation of the recorder card.
Starting recorder
Turn the recorder on (to the "ON").
Choose a speech in the main menu. Remove the memory card
to record on it (see more details on
Memory Card Rec. Mode in the operating instructions).
Recording starts when you press REC (red knob on a gray background) in the lower-left corner. To stop recording, press again. Do not remove the card while the near
it flashes.
viewing video
The recording can be seen as a buildin screen and PC. T To view the screen:
turn the recorder on (to the "ON").
Select "View" in the main menu. Select the tab,
Select an entry card.
6 Viewing recordings on a PC
To view entries from the PC, you must obtain a memory card with the corresponding record
the recorder and open it on a computer using a card reader. As data logging is done right
to MP4 conversion before displaying none is needed. Play the video received.

Jammer 20MHz - 2500MHz selectable RF band to 10-60W.

High performance programmable digital broadband jammer
Convoy protection
VIP protection of military or single vehicles or convoys from the threat of remote-controlled bomb blast has become a priority in the modern world. To enable an effective response to this threat, Eskan developed a high-performance

intelligent jamming system using Direct Digital Synthesis (DDS) technology that allows precise control of frequency sweeps and hopping.

Broad coverage of the chat window,
Digital interference system covers continuously and simultaneously the whole spectrum of the most widely used RF communication frequencies from 20MHz to 2500MHz. This includes special mobile phone module. The operator can select up to 48 programmable channels for communication links within the interference spectrum. Activation, operation and band control is wired remote control inside the vehicle. The system has an RS232 connection for programming via PC and for updating firmware.
Robust construction
550 watts RF jamming system is installed in the trunk, and a set of high-gain, the omni-directional antenna mounted on the vehicle roof. Unit forced cooling system ensures continuous operation in temperatures up to 55 ° C. This is completely independent jamming system designed for fast transfer from one vehicle to another. Weatherproof and shockproof, device operates continuously, while in transit in all weather and soil conditions.
High performance programmable digital broadband jammer
Protection against remote-controlled explosive devices
Covers 20MHz - 2500MHz (other bands on request)
550 watts total output power
High-performance, multi-band, vehicle installed jamming system
Jams mobile, satellite, VHF / UHF frequencies and WiFi
It comes as a "kit" for easy installation on the vehicle / disassembly
High-gain omni-directional antennas
Cable in the vehicle remote control for the control system
Jamming configurations observed if the batteries removed
Jamming signals generated by direct digital synthesis (DDS) technology,
Connecting to a PC to update the firmware
Forced air cooling system for high temperature operation
technical
jamming capability
Module 1: 20-100 MHz, Module 2: 100-300 MHz,
Module 3: 300-500 MHz,
Modules designed for mobile phones (with preset ranges)
GSM 800/900 MHz CDMA, GSM / PCS 1800/1900 MHz,
UMTS 2100 MHz,
Module 4: 500-900 MHz Module 5: 960 to 1800 MHz,
Module 6: 1900-2500 MHz,
output power
On module:
Modules 1, 2, 3 and 4 100W + / -1.5 dB
Module 5, and 6 mobile phone + 30W / -1.5 dB
Total output power:
Modules 1, 2, 3 and mobile phone: 390W + / -1.5 dB
All modules: 550W + / -1.5 dB
Jamming technology
Direct Digital Synthesis (DDS)
Field Programmable Gate Array (FPGA)
Jamming radius
Radius ≤ 30 m ≤ 500 m
programmable windows
Max 48 minimum resolution 1MHz
Connectors - Input
RS-232 for programming - parallel and distant
Connectors - Output
N-type
physical
operating modes
On / off, programmable via RS-232
management
On / off, band selection on the unit or on the remote
indicators
LED power indicator and function module on / off, low battery indicator
antenna
Roof box or single
Power supply 24 V DC
Operating temperature range -10 to +55 ° C
Humidity Up to 90%
Shock, vibration and shock resistant (with mounting racks).

Active Protection System electrical equipment to 230 V mains interception security.

The given technology protects you from unauthorized speakerphone information over the network supply leads 230. The market has found countless eavesdropping technology that allows digital traffic over a network socket. The interception is virtually impossible to detect, identify a problem that your appliance carries unauthorized information either data or video / audio, and the someone in your circle processes, makes listening.
The device is sorted into categories of active protection of information. Preventing information leakage through the power supply and ground lines providing masking noise on the line. It also suppresses any skewering on the network channels that use this data as a broadcast channel.
characteristics:
Noise frequency range from 0.01 to 300 MHz
230 V power line protected, ground
Spectral - noise density (at 50 Ohm load ratio of 1 m-V / √ kHz) frequency bands, is minimal:
0.01 to 1 MHz 90 db
1-10 MHz 70 db
10-100 MHz 50 db
100-300 MHz, 35 db
Noise level adjustment range of frequency bands is less than:
0.01 to 0.5 MHz 20 db
5-300 MHz, 12 db
Number of independent channels of sound signal ¹ 2
Noise quality factor of less than 0.9
Leakage current through the ground line and not more than 1 mA
Noise control manual control, remote control, RS-485

Operating conditions:
Operating temperature 0 to + 50 ° C
Relative humidity at + 25 ° C and 85%
Atmospheric pressure 750 ± 40 mm Hg
power supply:
AC 230 V ± 10%, 50 Hz
Power consumption not more than 12 W
Mass-volume:
Dimensions 172 х 172 х 42 mm
No more than 1.5 kg
for phase-to-ground and ground zero for districts

Audio Data Transmitting Systems via 230 V Mains

The device is a technical device for active protection of information on top-secret object category. The device provides protection for telephone and data transmission systems that use single-phase 230-V with ground network as an information transmission channel of any type of collection facilities by generating a digital noise widely.

The device prevents information leakage through the power and ground lines, providing there masking noise in the frequency range from 0.01 to 300 MHz. It also suppresses the speaker to use these lines as a channel for data transmission.

ADVANTAGES:
does not affect the performance of the computer and consumer electronics operation.
not sensitive to the tops of the net voltage up to 1 K-V.
It does not conflict with radio reception.

Main parts of the machine - noise generator, noise control and output amplifiers - are fully digital devices. This allows, while maintaining a high quality factor of the signal noise, to completely eliminate the possibility of leaks due to self-excitation, and generation of parasitic modulation of a voice signal of hazardous electrical signals, caused by the electroacoustic transducers in circuit elements, and the leakage through the supply lines.
uncorrelated noise generators circuits "Phase" - "country" and "zero" - "country" allows to avoid the possibility of signal interception informative for anti-phase and in-phase connection schemes.
The presence of independent regulators for low noise and high frequency bands to optimize interference spectrum for electromagnetic compatibility, while maintaining sufficient efficiency of masking noise.
The device has a first-class noise immunity boost and allows continuous operation in conditions equivalent to a short circuit. Applications standard output amplifier greatly increases the efficiency, reliability and stability of system parameters, allows it to operate in more severe weather conditions.
During operation the unit constantly performs self-test and if fault gives sound and light signal.
Switch on the device can be done with a button on the control panel or by remote control (optional).

Security System alarm protected objects

Alarm only protected area. Warn against illegal visit on the possible installation odposluchovej techniques.
Unique only access your card, separate personal alarm system unique to your room to be protected, including the protection of your desk, PC, or even safe boxes .

The control panel with GSM and LAN communicator enabling communication with a security center, user's mobile phone and web self-service. Part of the panel is a radio module that provides communication with the wireless components of the system.
The main access moduls RFID reader and keyboard control is equipped with a revolutionary 12 control segments for easy securing and unlocking system, including separate armed 7 offices, meeting room, kitchen and server. The module can be additionally controlled ramp at the parking lot and call for help in an emergency.
The second access module with RFID reader is located on the second floor and used to control a separate security server room
The installation allows for motion detector 13, 7 door sensor, 2 glass break detectors and fire detectors 5
Internal siren for alarm signaling are located on the first floor and Sruh
Outdoor siren is installed on the facade of the company headquarters towards the driveway
The delivery includes control parking ramp with 2 key rings, calling from a mobile phone user, or from the control segment ground floor access module
The company staff is ready 16 control identification cards.
New concept
Brand new alarm JABLOTRON 100 with the revolutionary control system is a comprehensive solution not only for the protection of persons and property against attack and fire, but integrates in a single core as well as the Smart home solutions.
It is a professional security system strictly require professional installation by a trained installer.
Alarm allows you to variably use of fieldbus and wireless system components. Flexibly adapt as demands to ensure a robust company and household needs while remaining easily controlled.
These seemingly incompatible requirements are satisfied Revolutionary Patented control. New to this alarm is not only control, but his entire architecture. Range of components, the variability number of peripherals, bus configuration, a new wireless protocol, the possibilities for communication and remote service and user access makes it a timeless electronic security solutions.
The patented control system
The control panel can control up to 300 user codes. To operate the system bus is available and fully wireless access module versions. All are equipped with an RFID reader and the model of the keyboard or keypad and display. The control modules are connected segments that with a simple traffic light logic makes control section, outputs, emergency calls and display of the system status. Thanks to the control segment showing the green and red indicator at a glance the status of each section and outputs the JABLOTRON 100 unique summary for each user. The system is operated by pressing the corresponding segment and verifies the code input or by attaching an RFID card or chip.
system properties
JABLOTRON 100 system is designed and certified according to EN 50131 security grade 2. The central bus architecture combines a wired connection for wireless connection of individual elements. Wireless communication is based on a new two-way dynamic transport protocol Jablotron 100 utilizing a frequency of 868 MHz with ensuring multiple protection of the safety and integrity of the system against spontaneous or deliberate collisions communication system. Communication range of individual devices are direct visibility of the order of hundreds of meters and can be extended by adding further radio module on the bus. For complete coverage of the secured area of ​​the system can be installed up to 3 modules of the radio.
JABLOTRON 100 has up to 120 wireless or fieldbus zones to assign detectors, keypads and remote controls, sirens or other elements. The system can be divided to 15 sections. To make use of the offers 32 programmable outputs.
communication

The control panel is equipped with a GSM / GPRS / LAN communicator that supports voice, SMS or GPRS communication with users and centers PCO. Supplement can communicator to telephone service.

Communicators Besides the transmission of information from the system functions as a modem for a full-featured remote access, monitoring, programming, and not least control outputs (thus eg appliances in the house). Remote access can be performed from the Web application, SMS commands and direct connection of the setup software, F-Link.
For individual solution design to ensure the building has available a wide range of elements in the fieldbus and wireless design. At least, one design offers a classic PIR motion detector and integrated independent acoustic glass break detector. The wireless variant is also available combined PIR and microwave motion detector. Such a solution is in wireless design completely unique. To secure doors and windows available miniature magnetic detector and a special "invisible" hidden magnet for installation in plastic window frames or doors.
For special applications designed miniature ceiling PIR detector and glass break detector. They are also suitable for use in secure vehicles parked within reach of a control panel. Plastic protection of the building complemented by external motion detectors and infragate. Fire safety addresses the optical smoke detector and the detector of explosive gases.
JA-101K control panel with built-in GSM / GPRS communicator
An essential element of the alarm system JABLOTRON 100. The control panel for the protection of family houses, offices and small businesses.
JA-113E The bus access module with RFID and keypad
JA-113E is an access module with control keyboard and RFID card reader for security system control. It includes one control segment and if needed, can be equipped with up to 20 control segments JA-192E.
JA-110P PIR motion detector The bus
JA-110P is a bus PIR motion detector designed for interior protection through Passive infrared motion detection in the room. Detection characteristics can be optimized using interchangeable lenses.
JA-110S The bus combined smoke and temperature detector
Bus fire detector JA-110S (optick8 and temperature detection) detects fire in residential and commercial buildings. Allows adjustment of detection: optical and thermal, optical or thermal only optical or only heat.
JA-110f The bus Flood detector
The detector is used to indicate the flooding areas (basement, bathroom, etc.) water. This information is transmitted to the control panel via bus.
JA-110A internal siren Fieldbus
The bus siren for indoor environments JA-110A is designed for acoustic alarm signaling, next exit and entry delays and PG output activation of the alarm system.

Audio spy equipment to intercept through walls profile Production.

Four audio sections, 200Hz, 400Hz, 800Hz, 1200Hz
Top audio extension 50000 times
A voice activity detector 20uV
Monitor mode for headphones, external speakers
AAA Battery x2
Power consumption 10 mA

The device allows you to listen to audio through walls and other obstacles. This is already the product of professional-quality microphone Knowles. The market is also cheaper versions available, but the best efficiency is only needle Knowles microphone in a given product.

Listening devices attach to the wall and through headphones hear what's happening behind her. The device operates on the basis of the reinforced sound vibration. When people talk, their voices accompanied wavelengths depending on their voice and the perfect listening device to their senses. When the wavelength of a small, i.e., the wall of people talking quietly, amplifies the voice of the potentiometer on the device. The device is highly sensitive and works on walls, doors, windows and metal.
Eavesdropping sigint.sk company also has active noise gate, ask the eavesdropping device!

specification

The device can connect up to two headphones, or instead of one handset, you can connect audio voice recorder.

2 x 3.5 mm headphone jack,
1x 2.5 for connecting an external microphone.
sensitivity 20uV
Power consumption 10 mA
AAA Battery x2


Features:
Highly sensitive metal detector.
Monitor the voice on the other side of the wall and the concrete is not a problem, wood, metal, glass.
The jack and REC voice output for recording simultaneously as the general recorder.
Four audio sections
A section (200Hz)
B. section (400Hz)
C. section (800Hz)
D. section (1200Hz)
Adjustable depending on the local situation.
The highest frequency resolution up to 50000 times
Applied for monitoring space and the information that is in sight.

intersection
Concrete wall, reinforcing steel bar wall, wood wall, metal walls, glass walls, brick wall

monitor mode
Headphones, external speakers
Recording mode Audio output for external recorder
-20 ~ 50
Weight 140 g

Dimensions 84 * 62 * 21 mm
Inserted into the device, 2 pcs AAA 1.5V batteries. Gently unscrew the large screw on the black device, which as shown, insert 2 pieces of AAA battery pack. In 2.5mm insert the jack from an external microphone. To insert external collections 3.5 mm headphones (or one receiver) Turn on the device and external needle roller microphone attach to the wall. For permanent installation, try the device pressed strong adhesive tape. Place a microphone or the image, and the team will stick to the wall. Of course side where the needle is monitored to the wall. Do not attach adhesive device can damage the vibrating needle. Also, do not force the only way the needle into the microphone. It is a sensitive device - Knowles microphone.
It is one of the few products that do not come from China, but from a small island - Japan.

The device may first appear as a stethoscope, but in fact it is only a modern listening devices. No more gluing the ears to the wall. This device has a built-in inside the internal amplifiers to give you escaped not even the slightest rustle. You're so neighborly quarrel can literally enjoy.

Some may remember how people used to listening in "secret" talks, which took place for example. for the walls of your living room. Such interception was mostly carried out by any classical hollow cup or something to make you sound perfectly "reflected" in his ear. Today's generation has these items it does not need to solve it your way, and as otherwise technically.

While this is a big enough curiosity, but people obviously can not stay in one place and technical excellence must also figure out the things that they would rather the human factor to be dismissed. Same company is entering the market with genuine listening device that can be tapped spotting sounds that are happening behind the walls of your rooms.

There are several types of special microphones. The fundamental require the direct installation in the room (at the monitoring point), which limits their usefulness. Directional microphones turn, it affects a wide area. Their range is approximately 50 meters. Worse plague are vibration sensor microphones and microphone. They are used because the properties of sound in solid materials.

Microphone probe must be in "contact" with the monitoring room. Vibrating microphone picks up vibrations caused by sound material. The best quality are able to eavesdrop on calls for 30 cm thick wall. Their problem is that the walls not conduct only sounds from the room, but the noises from the street. On the wall adjacent to the main road in the center of the city, you are likely to find.

Covert surveillance audio via wired microphones.

Covert surveillance audio to jobs in an area of ​​up to 5.6 km from the control unit - up to 10 pcs of separate microphones. For each of the channels is a selection of miniature microphones, which are supplied from the central control unit of supervision. The system is quickly and easily set up and operate.

noise reduction
Microphones can be hidden installed in places that should be monitored by means of existing or new management. Digital Noise Reduction system allows conversations means, although there is a high background noise, or intentionally introduced or natural.

Highly sensitive microphone
Each of these channels can be individually adapted to the level of ambient noise and voice monitoring point. The lead guide by a set of a visual indicator for each channel, which allows the best signal that can be obtained. In calm conditions, high sensitivity miniature microphones may allow the breath to be captured up to 2 meters.

visual indicators
Visual indicators show when voice or other activities, is present in the target area and provide notification when there is a fault line, or if the microphone disconnected. The system operates over a wide area using standard telephone wires.

external output
As well as live monitoring, the output of the channel outputs designed for high levels of recording equipment for direct connection to multi-channel audio / video recorders relate to the same area.

Immune to RF detection
This multi-channel audio operation monitoring is difficult to detect because it is immune to RF detection systems and RF interference.


Multi-channel audio system cable
Designed for long-term monitoring
Immediately intelligible audio signals with digital signal processing
Simple operation with Visual indicators for voice or other activities
High sensitivity miniature microphones individually controlled
Direct connection to the record performance and VCR / DVR systems
Microphones powered from a central system
5.6 km surveillance range with a standard telephone wire
Immune to RF and RF jammer detection


Technical - Control unit
Frequency range: + / - 3 db 300 Hz to 4 kHz
Microphone Power supply: Current limited supply
Background noise cancellation: up to 35 db
Headphone output: 30 mW / 30 ohm headphones
Recording Output: Not 1 max> 10k ohms load;
Front max 50 mV with a 2 ohms load
Record Output Impedance: 600 ohms nominal
Channels 10 microphones.
Physical - control unit
Controls: (per channel)
3 levels of microphone sensitivity switch;
10 noise voters; Headphone volume control.
Indicators (per channel)
Red LED for remote fault lines;
Orange and green LED for level of microphone sensitivity settings;
Yellow LED channel activity.
Connectors - Output:
(Per channel)
3.5 mm jack and phono for high output record;
3.5mm low output record;
3.5 mm stereo headphone jack for monitoring.
Connectors - Input:
For each channel, 3.5mm mono jack for remote line connection to the microphone / pre-amp unit.
12V output: 2.1 x 5.5 mm jack barrel.
Power supply: 110/25 V AC 50 Hz to 60 Hz
12 V DC, 0.5 amp max.
Size 280 x 310 x 104 mm (WxDxH)
Weight 2.8 kg (including transducers, and cables).
Technical - Microphone preamplifier
Line driver capability: Up to 5.6 km with a standard telephone wire
Power: from the control unit via the telephone wires used for signal
Audio dynamic range:> 70 dB (90 db for active noise reduction)
Audio description: Apartment in the range of + / - 3 db from 300 Hz to 4 kHz
Weight: 4 GM, including 0.5 m cable line connection.
Includes a control unit
Power adapter:
110/250 VAC with 1.8 m AC input and DC output leads.
Microphone / preamplifier 10.

Faraday cage - your car will not protect any system. The best.

You have a car provided the most advanced car alarm connected to security services? Today will not help to even that.
Just a car covered with tarpaulin and special or out of the car does not pass any RF signal.

Formed celouzatvorená cage formed of a conductive material - a special substance. The internal space of the cage is protected (covered) to the effects of external electrical, electrostatic and electromagnetic fields and waves. The principle lies in the characteristics of electrical charge which focuses only on the surface of the conductor, but not in the volume. The cage as a whole functions as a conductor, therefore, in its interior volume is not charged. Electromagnetic radiation is absorbed by the surface of the cage.

Faraday room, a Faraday cage
Properties and Applications
Faraday cage effect arises only celouzatvorených areas.
Inside an ideal Faraday cage there is no possibility of receiving electromagnetic waves (eg. Radio).
Voltage discharge (eg. Flash) to penetrate the Faraday cage and is spread across the surface.
If the electric discharge generated inside the Faraday cage, it will not penetrate from the outside.

Faraday cage is ideal celouzatvorená container without any holes. Non-ideal Faraday cage, in fact, only the external electromagnetic field weakens, but is not able to shield it completely. The field penetrates into it through openings in the walls of the cage. With increasing frequency electromagnetic fields penetrate through the holes increases as shorter wave breaks through the hole without cages "touched". To fully shield the high frequency fields is therefore necessary to use the full material without holes and slots. Such shielding is working in a wide range of frequencies up to the X-rays, when the metal thin film becomes transparent for that frequency.

In Slovakia, the company is offering a Faraday cage in the form of the substance.
RF shielded Faraday tents are made of strong and highly conductive textiles. Tents are supplied as standard with several ropes for easy mounting on the ceiling or with self-standing frame.

Requests from customers are different, usually experiments EMC, RF measurements, mobile military / secret trial and passenger protection in the area. Faraday tents offer a mobile solution fraction of the cost compared to conventional Faraday cage.

NEW: Maintain visual contact with the experiment
Double layer of soft vascular tissue can be installed it allows you to maintain visual contact medzivnútri or outside the tent.

Access protected by Faraday
Typically, the access point is made of a magnetic tape coated with a layer of conductive fabric. Magnetic clasp ensures excellent electrical contact to the sides. If necessary, it can also be provided with entrance with conductive velcro strap.

This is a RFI / EMI shielding tents who have left are made of highly conductive material is ultra light and powerful lyrics.

Statutes shielding performance (dB)
Computer and forensic mobile phone
Military Department / Embassy of use
Secure / TEMPEST communication
Radar Jammer protection
Electromagnetic Allergy / Electro smog
Pre-compliance testing EC
Temporary shielding against EMI
Reverberation chambers (RVC)
Mode-moved chamber (MSC)

Easy to assemble and move, mobile laboratory

any size
Optionally available with a solid floor reinforced
Monolayer ten tons 40-60 db to 22.5 GHz
The bilayer ten tons 70-90 db to 22.5 GHz

ADDRESS:
Vodárenská 11 Prešov region Košice 080 01 Slovak Republic

TELEPHONE NUMBER:
0903 040 562
FAX:
0650 406 789
MOBILE:
0650 40 1234